DIY Smart Blind Stick Using Arduino Nano

Navigating daily environments can be difficult for visually impaired individuals. To improve mobility and safety, this project introduces a DIY smart blind stick using Arduino Nano, an ultrasonic sensor, and a buzzer. It’s simple, budget-friendly, and serves as a practical aid for obstacle detection. The system works by detecting nearby objects and alerting the user via sound and light signals.

How the Blind Stick Works

This Arduino-based stick functions as an assistive tool by constantly checking for nearby obstacles and triggering alerts. It includes:

• Ultrasonic Sensor (HC-SR04): Detects objects by sending ultrasonic waves and receiving the reflected signal.
• Arduino Nano: Acts as the central controller, calculating distance and triggering alerts.
• Buzzer and LED: Provide audio and visual warnings depending on the proximity of obstacles.

Obstacle Detection

The ultrasonic sensor emits a sound wave when triggered by the Arduino. When the wave hits an object, it reflects back and is received by the sensor’s echo pin. The time taken for the round trip helps calculate the distance.

Distance Calculation

The Arduino uses the following formula to calculate distance:

Distance = (Time taken by the signal to Hit and bounce back / 2) / 29.1

For example, a 500µs round-trip means the object is roughly 8.59 cm away.

Alerts

If the object is within 50 cm:

• Buzzer: Emits a beep. The closer the object, the faster the beep.
• LED: Flashes similarly, helping those with partial vision.

Components Required

• Arduino Nano
• HC-SR04 Ultrasonic Sensor
• 5V Buzzer
• LED
• 220Ω Resistor
• 9V Battery
• On/Off Switch
• Breadboard and Wires
• PVC Pipe for stick body

Block Diagram

The block diagram includes the Arduino Nano at the center, connected to the ultrasonic sensor (for input) and buzzer/LED (for output). A 9V battery powers the system.

Circuit Diagram

The sensor’s VCC, TRIG, ECHO, and GND are connected to Arduino pins. The buzzer and LED are connected to output pins through resistors. The entire circuit is powered by the battery via a switch.

Note: The sensor draws around 15mA, which is safe to power directly from Arduino GPIO pins.

Hardware Assembly

All components are placed on a small breadboard and fixed to a PVC pipe using zip ties. The battery is mounted with double-sided tape. The sensor is positioned at the top to detect obstacles ahead.

Arduino Code Overview

The code reads distance and triggers alerts based on it. It uses millis() for multitasking of the buzzer and LED.

Uploading Code

1. Open Arduino IDE.
2. Select the board: Arduino Nano (ATmega328P).
3. Choose the correct COM port.
4. Paste and upload the code.

Once uploaded, your Arduino Nano starts working as the control unit for the blind stick.

Final Assembly

Fix the entire circuit onto the PVC pipe. Position the ultrasonic sensor to face forward and secure components using zip ties or tape. Ensure the switch is easily accessible for quick power control.

This project is a basic yet functional solution to help people with vision challenges navigate safely. It uses minimal components, is easy to assemble, and can be enhanced further with features like GPS or vibration alerts. You can find the full code and diagrams on the GitHub repository in the original tutorial.

https://circuitdigest.com 

Robotics Projects |Arduino Projects | Raspberry Pi Projects|

ESP32 Projects | AI Projects | IoT Projects | Drone projects | Electronic Circuits | Electronics Projects

DIY Arduino based Face Tracking Robot

In this project we are going to build a robot using arduino and android which detects and tracks the face. We have attached a camera phone so the mobile camera will move along with your face with the help of servos. The advantage of using the Android Mobile Phone here is that you do not need to invest on a camera module and the whole image detection work can be done in the phone itself, you do not need your Arduino connected to your computer for this to work. We can use a Bluetooth Module interfacing with Arduino to communicate with Mobile wirelessly.

You can build this robot by yourself following the instructions and detailed tutorial with circuit diagram, codes and files given here.

Watch the Youtube video below which shows how this face tracking robot works:

Arduino LED Scroll Bar

In this post we are covering a detailed DIY project to build an Arduino based LED scroll bar, as shown in the below picture.

This is quite simple project and only requires Arduino nano and few LED stips, along with some other basic electronic components.

So go through the link below to find the circuit diagram, PCB files and a detailed guide to build this beautiful LED scroll bar.